OMRON E3JK в наличии на складе в Москве

Sensors

E3JM

Sensing method	Appearance	Connection method	Sensing distance	Operation mode	Output configuration	Functions	Model
Through- beam		Terminal block	10 m (Infrared light)	Light-ON Dark-ON (Switch selectable)	Relay	---	E3JM-10M4
							E3JM-10M4T
					DC SSR	---	E3JM-10S4
							E3JM-10S4T
Retro-re- flective with MSR function			4 m (Red light)		Relay	---	E3JM-R4M4
							E3JM-R4M4T
					DC SSR	---	E3JM-R4S4
							E3JM-R4S4T
Diffuse- reflective			700 mm (Infrared light)		Relay	---	E3JM-DS70M4
							E3JM-DS70M4T
					DC SSR	---	E3JM-DS70S4
							E3JM-DS70S4T

E3JK

Sensing method	Appearance	Connection method	Sensing distance	Operation mode		Output configuration	Model
Through- beam		Pre-wired	5 m (Infrared light)	Light-ON		Relay	E3JK-5M1
				Dark-ON			E3JK-5M2
				Light-ON Dark-ON	Both selectable	DC SSR	E3JK-5S3
Retro- reflective with MSR function			2.5 m (3 m)* (Red light)	Light-ON		Relay	E3JK-R2M1
				Dark-ON			E3JK-R2M2
				Light-ON Dark-ON	Both selectable	DC SSR	E3JK-R2S3
Retro- reflective without MSR function			4 m (5 m)* (Red light)	Light-ON		Relay	E3JK-R4M1
				Dark-ON			E3JK-R4M2
				Light-ON Dark-ON	Both selectable	DC SSR	E3JK-R4S3
Diffuse- reflective			300 mm (Infrared light)	Light-ON		Relay	E3JK-DS30M1
				Dark-ON			E3JK-DS30M2
				Light-ON Dark-ON	Both selectable	DC SSR	E3JK-DS30S3

Note: UL-listed models have the -US suffix. (Example: E3JM-10M4-US). Tightening nuts, washers, and rubber bushings are not provided with these models.

Change: Shape of the E3JM conduit socket

Note, however, that DC-type E3JK SSR Output Models are not UL-listed.

^*Values in parentheses indicate the sensing distance when using E39-R2 Reflectors.

Accessories(Optional)

Slit

Slit width	Sensing distance		Minimum detectable object (typical)	Model	Quantity	Remarks
1 mm × 20 mm	E3JM-10[]4(T)	1.2 m	1-mm dia.	E39-S39	1 Slit each for the Emitter and Receiver (2 Slits total)	(Seal-type long slit) Can be used with the E3JM-10[]4(T) and E3JK-5[][] Through- beam Models.
	E3JK-5[][]	0.7 m

Reflectors

Name	Sensing distance (typical)		Model	Quantity	Remarks
Reflectors	E3JM-R4[]4(T)	4 m (rated value)	E39-R1	1	Provided with the E3JM-R4[]4(T) Provided with the E3JK-R2[][] Provided with the E3JK-R4[][]
	E3JK-R2[][]	2.5 m (rated value)
	E3JK-R4[][]	4 m (rated value)
	E3JK-R2[][]	3 m	E39-R2	1	---
	E3JK-R4[][]	5 m
Small Reflectors	E3JM-R4[]4(T)	3.5 m	E39-R3	1	---
	E3JK-R2[][]	1 m (5 mm) *
Tape Reflectors	E3JM-R4[]4(T)	1 m (200 mm) *	E39-RS1	1	Enables MSR function.
	E3JK-R2[][]	750 mm (200 mm) *
	E3JM-R4[]4(T)	1.6 m (200 mm) *	E39-RS2	1
	E3JK-R2[][]	1.2 m (200 mm) *
	E3JM-R4[]4(T)	2 m (200 mm) *	E39-RS3	1
	E3JK-R2[][]	1.5 m (200 mm) *

Note: When using any reflector other than the provided one, use a sensing distance of approximately 0.7 times the typical value as a guide.

^*Values in parentheses are the minimum required distance between the Sensor and Reflector.

Mounting Bracket

Appearance	Model	Quantity	Remarks
	E39-L53	1	Provided with the E3JM.
	E39-L40	1	Provided with the E3JK.
	E39-L51	1	Mounting Bracket designed for changing from he E3A-M, E3A2, E3A3, OA-5, or OA-5N to the E3JM

Note: If a Through-beam Model is used, order two Mounting Brackets, one for the Emitter and one for the Receiver.

E3JK

Документация

Информация для заказа